Flexible Metal Corner Tape
QUANJIANG is one of the leading manufacturers and suppliers of one of the world famous brand fiberglass drywall joint paper tape in China, welcome to buy or wholesale customized drywall joint paper tape made in China and get its free sample from our factory.
◆ Drywall Joint Paper Tape
Flexible metal corner tape is ideal for different corners and angles which are 90 degrees to prevent corner not damage. It has high strength and rustiness resistant.
Material: Paper tape with metal strip reinforced. Paper tape is reinforced fiber paper.
Metal has aluminum strip or galvanized steel strip or zinc finished metal strip.
Dimension: 5cmx25m, 5cmx30m or as requirements.
Flexible Metal Corner Drywall Joint Tape
|Metal type||galvanized steel||zinc finished metal||aluminum|
|Distance between two strips||2mm±0.5mm||2mm±0.5mm||2mm±0.5mm|
|Paper unit weight||140g/m2±10g/m2||140g/m2±10g/m2||140g/m2±10g/m2|
|Paper perforation type||Pin type perforated||Pin type perforated||Laser perforation|
The flexible metal corner tape is easier to use than traditional metal corner bead.
It is a widely used tape in various applications, especially used for wall renovation, decoration and the like. It can be stuck to plaster boards, cements and other building materials completely and can prevent against the cracks of the wall and its corner.
◆Advantages and benefits:
* Excellent tensile strength
* Galvanized steel or Aluminum strip
* Anti-Corrosion and Rust-proof
* Easy cut and application
◆Instruction of Uses:
Cut flexible metal corner tape into one of the two strips with a knife to score and bend. The distance between your cuts will depend on how tight a radius you want to achieve. Apply generous coat of joint compound to a depth of 1/8”, covering both sides of the corner the same time. With the metal facing the wall, fold tape at the center margin and press firmly into the compound.
Once the corner is embedded, remove excess compound with taoing knife. After the first coat dries, sand lightly, apply finish coat and feather edges two inches beyond edges of the first coat. If needed apply a second coat 6”-10” wide on each side of corner. When dry, sand lightly is needed. The wide , galvanized steel strips act as a guide to ensure straight, reinforced angles for both “ inside” and “outside” corner needs.
Material: Reinforced fiber paper
Dimension: 2”(5cm)x250’(76.2m), 50mmx75m, 50mmx150m…
◆Advantages and Benefits
* Tape is manufactured from a special fibered paper with added tensile strength to help prevent tearing, wrinkling or stretching.
* Paper fiber polished for better adherence.
* Tape has precision-matched center crease for easy and accurate corner applications.
* With high wet and dry strength, the intensity of dry is ≥6.5KN/M, The intensity of wet is ≥2.5KN/M.
* Double matting, the joint strength is higher, the minimum fiber adhesion is not less than 50%.
* Laser perforation or pin type perforated, permeability is good, effectively avoid the peeling and the layer.
Each roll in white box.
With carton box or pallet
Designed to reinforce and hide the joints and corners, easy to solve the joints problems
FOB port: Ningbo Port
Small samples: free
Customer design: welcome
Minimum order: 1 pallet
Delivery time:15~25 days
Terms of payment: 30% T/T in advanced, 70% T/T after copy of documents or L/C